Made of 3mm thick aluminium - the wall can be securely fixed in place and added to the short or long side of the pond, making it even more dynamic element of the garden.

The 600mm water blade creates a waterfall effect and VP3 Pump comes as standard.

Advantages:

• Aluminium pond walls are very robust, hard-wearing, resistant to corrosion and durable.
• Scratch-resistant
• Good quality, weatherproof material
• Stainless steel fasteners and pump are included

Wall is available in 5 colours.

Important:

• Products should be unpacked immediately upon receipt to release any moisture trapped inside the packaging. This moisture can cause stains that are difficult to remove.
• The guarantee expires if you drill or grind in a way that is not specified.
• The water used in this product should have a neutral pH value (7) to protect the look and quality of the material.
• Clean annually by hosing dirt from the product with clean tap water, followed by cleaning with detergent. Do not use a pressure washer and/or scouring pad for this purpose. This damages the coating.

Using your pond in winter:

• In freezing temperatures, always remove the plug from the power socket.
• Reduce the water level to at least 10 cm below the edge.
• We recommend using an ice preventer (available at any garden centre or hardware store).
• If the above conditions are met, the pump can remain in the water. You can also remove the pump from the pond and store it in water (above 0°C) over winter.